How to use Klmover - a utility for changing Network agent parameters
Klmover.exe
utility is designed for changing Administration server parameters in
Network agent settings on a client PC. The utility is located on a
client PC in the Network agent installation folder - C:\Program Files\Kaspersky Lab\NetworkAgent 8\.
In order to function, the utility should be run on each client PC under a local administrator account.
The utility is started via command prompt and has the following switches:
klmover
[-logfile LOGFILE] [-address SERVER_ADDRESS] [-pn NON_SSL_PORT] [-ps
SSL_PORT] [-nossl] [-cert CERTIFICATE] [-silent] [- dupfix]
- -logfile LOGFILE
- create a utility run log. By default, the information will be stored
in the stdout.tx file; if run without this switch, error messages will
be displayed on the screen;
- -address SERVER_ADDRESS - new Administration server name. Can contain IP address, NetBIOS or DNS name; Example : klmover -address 172.16.2.2
- -pn NON_SSL_PORT
- indicates to Network agent an Administration server port for
establishing a non-secure connection. This switch is optional; the
default port is 14000;
- -ps SSL_PORT -
indicates to Network agent an Administration server port for
establishing a secure connection. This switch is optional; the default
port is 13000;
- -nossl - connect to
Administration server using a non-secure connection, Without this
switch, Network agent will connect to Administration server using the
secure SSL protocol.
- -cert CERTIFICATE - new Administration server certificate file path. This switch is optional;
- -silent - silent mode.
- -dupfix
- this switch is obligatory if you installed Network agent by some
alternative method (e.g. restore from a system image) instead of using a
distribution package.
For example:
klmover -address admsrv -logfile klmover.log
The
utility should be run on a problematic host just once. Multiple
execution of the utility on a host will result in appearance of
duplicate file names in Kaspersky Administration Kit console.